ABSTRACT
OBJECTIVES@#This study aimed to establish a new treatment of the mandibular second molars with external root resorption caused by impacted teeth to preserve the affected teeth and their vital pulps.@*METHODS@#For mandibular second molars clinically diagnosed as external root resorption caused by impacted teeth, debridement and removal of the root at the resorption site via micro-apical surgery and direct capping of the pulp with bioactive material on the surface of the root amputation via vital pulp therapy were performed immediately after the impacted teeth were extracted.@*RESULTS@#The external root resorption of the affected tooth was ceased. It was asymptomatic with intact crown, normal pulp, periapical alveolar bone reconstruction, normal periodontal ligament, continuous bone sclerosis, and no periapical translucency in radiographic examination at the 1-year postoperative follow-up, thus showing good prognosis.@*CONCLUSIONS@#Simultaneous combination of micro-apical surgery and vital pulp therapy after extraction of impacted teeth could successfully preserve mandibular second molars with ERR caused by impacted teeth and their vital pulps.
Subject(s)
Humans , Tooth, Impacted/surgery , Molar , Mandible , Dental Pulp , Root Canal Therapy , Root Resorption/etiology , Tooth ExtractionABSTRACT
SUMMARY: The objective of this study was to evaluate the bilaterality and symmetry in C-shaped mandibular second molars in Mexican Maya and non-Maya populations using cone-beam computed tomography (CBCT). Five-hundred-twenty-five CBCT scans of patients with left and right mandibular second molars were analyzed to determine the prevalence and bilaterality. The teeth were assessed for the presence of C-shaped root canals, according to Fan et al. (2004) criteria. The sample was subdivided by ethnicity, sex, unilateral/bilateral presence, side of the longitudinal groove, and the C-shaped root canal configuration and symmetry, at the cervical, middle, and apical cross- sections of the root. C-shaped mandibular second molars were present in 24.95% of the individuals. Most (60.30%) of those showing this trait had it bilaterally. When comparing by ethnicity, sex, and side, we detected no significant differences. The vast majority (97.33%) presented the groove along the lingual side. The C3 was the most prevalent configuration in the overall sample, while in the Maya group, the C1 was the most common configuration. When analyzed by sex and ethnic group, the non-Maya females tended to deviate from the other groups in terms of bilaterality. Overall, 55.70% of bilateral C-shaped mandibular second molars were also symmetric in the three radicular thirds. The prevalence of C-shaped mandibular second molars was similar to that reported for northernAsian populations, which is consistent with the evolutionary origins of Native American populations. Most of the sample showed bilaterality and half were symmetric. Clinicians must be aware of the ethnic background of their patients and consider the possible variations to do more predictable root canal treatments.
RESUMEN: El objetivo de este estudio fue evaluar la bilateralidad y simetría de los segundos molares mandibulares en forma de C en una población Mexicana Maya y no-Maya mediante tomografía computarizada de haz cónico (CBCT). Material and Métodos: Se analizaron quinientos veinticinco tomografías de pacientes con segundos molares mandibularesderecho e izquierdo para determinar la prevalencia y bilateralidad. Los dientes fueron evaluados según la presencia de conductos en forma de C de acuerdo a los criterios de Fan et al. La muestra fue subdividida por etnicidad, sexo, presencia bilateral/unilateral, lado del surco y configuración y simetría de los conductos en los cortes transversales cervical, medio y apical. Los segundos molares mandibulares en forma de C estuvieron presentes en el 24.95 % de los individuos. La mayoría (60.30%) de los que mostraron este rasgo lo hicieron de forma bilateral. El comparar por etnicidad, sexo y lado, no se encontraron diferencias estadísticamente significativas. La gran mayoría (97.33%) presentó el surco por lingual. C3 fue la configuración más prevalente en la muestra general, mientras que en el grupo Maya el C1 fue la más común. El análisis por sexo y grupo étnico arrojó que las mujeres no Mayas tendieron a desviarse de los otros grupos en términos de bilateralidad. El 55.70% de los segundos molares mandibulares bilaterales fueron simétricos en sus tres tercios radiculares. La prevalencia de los segundos molars mandibulares en forma de C fue similar a la reportada para las poblaciones del norte de Asia, lo cual es consistente con los orígenes evolutivos de las poblaciones nativas americanas. La mayor parte de la muestra presentó el rasgo de forma bilateral y la mitad de éstos fueron simétricos. Los odontólogos deben tomar en cuenta el origen étnico de sus pacientes y considerar las posibles variaciones para realizar tratamientos endodónticos más predecibles.
Subject(s)
Humans , Male , Female , Dental Pulp Cavity/diagnostic imaging , Cone-Beam Computed Tomography , Mandible/diagnostic imaging , Molar/diagnostic imaging , Ethnicity , Age Factors , Dental Pulp Cavity/anatomy & histology , Mandible/anatomy & histology , Mexico , Molar/anatomy & histologyABSTRACT
Objective @#To investigate the effect of the clinical application of molar uprighting in the treatment of impacted mandibular second molars.@*Methods@# A total of 16 cases of impacted mandibular second molars were chosen, and the impacted molars were treated with straight wire appliances and molar uprighting. Before and after treatment, the vertical angle of the molar, the height of the distal buccal tip, the height of the distal buccal tip of the anchorage molar, the depth of the periodontal pocket and the height of the alveolar bone were measured. Moreover, the treatment cycles of the third molar extraction group, the premolar group and the nonextraction group were compared.@*Results @#All impacted molars responded well to treatment. The vertical time of impacted molars was (1.34 ± 0.45) months, (2.20 ± 0.57) months, and (2.30 ± 0.45) months in the third molar extraction group, the premolar extraction group and the nonextraction group, respectively. The treatment time of the third molar extraction group was shorter than that of the other two groups, and the difference was statistically significant (P < 0.05). After treatment, the inclination of impacted second molars increased by (25.94 ± 8.85)°, the elongated distal buccal tip was depressed by (1.00 ± 1.48) mm, the depth of the proximal and middle periodontal pocket of impacted molars decreased by (1.21 ± 1.03) mm, and the height of the alveolar bone of the proximal and middle adjacent surfaces of impacted second molars increased by (4.57 ± 1.45) mm; these differences were statistically significant (P < 0.05). There was no significant difference in the height of the distal buccal tip of the first molar before and after treatment (P > 0.05).@*Conclusion @#Molar uprighting is an efficient, reliable, and convenient method that can shorten the treatment period. Extraction of crowded third molars is beneficial for the vertical and periodontal health of impacted second molars.
ABSTRACT
Ambiguity in the root morphology of the mandibular second molars is quite common. The most common root canal configuration is 2 roots and 3 canals, nonetheless other possibilities may still exist. The presence of accessory roots is an interesting example of anatomic root variation. While the presence of radix entomolaris or radix paramolaris is regarded as a typical clinical finding of a three-rooted mandibular second permanent molar, the occurrence of an additional mesial root is rather uncommon and represents a possibility of deviation from the regular norms. This case report describes successful endodontic management of a three-rooted mandibular second molar presenting with an unusual accessory mesial root, which was identified with the aid of multiangled radiographs and cone-beam computed tomography imaging. This article also discusses the prevalence, etiology, morphological variations, clinical approach to diagnosis, and significance of supernumerary roots in contemporary clinical dentistry.
Subject(s)
Cone-Beam Computed Tomography , Dental Pulp Cavity , Dentistry , Diagnosis , Molar , PrevalenceABSTRACT
Objective To determine the prevalence of symmetry of C shaped root canal system in mandibular second molars.MethodsA total of 70 madibular second molars with C shaped root canal system to be considered as needing root canal therapy were included in this study,of which 68 contralateral X ray apical films were obtained.The symmetry of the root and the root canal system was analyzed using magnifying glass.ResultsOf the 68 mandibular second molars with C shaped root canal system diagnosed clinically,62 cases with C shaped root canal system bilaterally,with the prevalence 91.18%.ConclusionThe anatomic feature of mandibular molars with C shaped root canal system is complicated,and the prevalence of symmetry is very high,which is in favor of estimating the anatomic feature from contralateral tooth.
ABSTRACT
Objective:To compare the sealing ability and marginal adaptation of three obturation techniques when used in root canal obsturation of c-shaped canals of mandibular second molars. Methods:Twenty-one extracted mandibular second molars with C-shaped canals were randomly divided into three groups. After instrumentation, the canals were filled using three different techniques: ObturaⅡ(group A), cold lateral condensation (group B) and Thermafil (group C). Then, gaps,obturated lateral canals and reticular apical triangles on the X-ray were counted. After dyeing for 7 days in the ink, dyeing lines were measured to reflect the microleakage. The percentages of gutta-percha, sealer and gaps on the root canal surface were determined by analyzing the images of 3 sections per tooth. Results:The reticular apical triangles were most frequently observed in group C(P
ABSTRACT
Objective:To investigate the root canal anatomy of one-rooted mandibular second molars. Methods:The root canals of 18 one-rooted mandibular second molars were visualized on radiographs and clinical examination, some specimens were cut at the mid-root level and observations were made on the coronal root section. Teeth with C-shaped canal system were categorized by using a modification of Melton classification.Results:12 molars exhibited C-shaped canals.2 molars were classified as category Ⅰ,5 as Ⅱ and another 5 cases as Ⅲ.Conclusions:C-shaped canals in mandibular second molars vary in canal number and shape.